Canna bis 3D VTS Sublimation Pattern Sheets

VTS Sublimation Pattern Sheets

Add a pattern to your polyester garments and blanks created by our Art Department! Dye sublimation transfers are a great way to get started in the dye sublimation world with out committing to a printer just yet. Dye sublimation transfers are different than your standard heat transfer vinyl. While both are applied with heat still, dye sublimation is an ink that gases itself into the garment. This is why white 100% polyester garments work best for this, it will give you the brightest, richest color for your project. If you decided to press it on a light colored blended garment such as 50/50 you will still achieve a great transfer, however it will not be as vibrant of a print. But this is great if you are going for a vintage vibe! With that said, dye sublimation should not be pressed onto dark garments. These dye sublimation backgrounds printed on our standard paper and are great to add some texture to your 100% polyester garments and dye sublimation blanks.

• 8.5" x 11" sheet
• Sublimation will work best on 100% white polyester soft garments
• Can work on other types of garments such as 50/50 blends and cotton
• Press onto other light colored garments but note that it will not be as vibrant as it will take on the color of the garment
• Don’t see your favorite pattern here? Let us know!
• May delay your order 1-3 business days; depending on the time the order is placed and the quantity.
• This is a non-returnable product
• Colors are subject to change without notice 

• 375° F - 400° F
• 30-90 seconds
• Peel HOT
• Medium to Firm
• White 100% polyester garments, Dye sublimated ready dishware (mugs, plates, etc.), or Dye Sub Blanks

Masking, Cutting, and Weeding Instructions

Masking:

• Lay the Sub Pattern Sheet with printed side facing down-the white side of the paper should be facing up
• Take a sheet of the mask and remove the protective backing from the mask
• Place the mask on top of the white side of the Sub sheet
• Squeegee the mask to the paper to ensure there are no bubbles and that the mask covers all the area of the sheet

Cutting:

• Place the sheet on your cutter with the design/pattern side facing up
• Cut in mirrored image