All of our vinyl comes with an adhesive on one side with a paper backing that protects the adhesive until exposed. Temperature sensitive vinyl that, when chilled below 59°F (15°C), changes to a vibrant blue. When returned to a warmer temperature, the vinyl changes back to its frosted translucent color. Has a permanent adhesive, but it is not recommended for outdoor applications due to UV fading.
- Adhesive: Permanent *Not recommended for outdoor durability
- Thickness: 3.5 mil
- Minimum Application Temperature: 41°F to 122°F
- Applied Temperature Resistance: -50°F to +225°F
- Compatible with most craft cutters such as: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, Quickutz, Inspirations, Pazzles, etc. Cut Settings
- Recommended Hand Wash Only
Due to the strong, permanent adhesive and gloss finish , it is highly recommended to burnish the transfer tape thoroughly and peel release liner away from transfer tape instead of lifting transfer tape/vinyl up. Please see application video for complete application instructions
Note: Life expectancy can vary depending on harshness of UV exposure.
Cut Limitations: Due to stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.
Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.